STATIC DISSIPATIVE VEST

Meets ANSI/ISEA 107 Type R Class 2 Polyester Mesh 2" Reflective w/contrasting trim Expandable Hook & Loop Closure

Segmented Tape T-Shirts having 2" OCX™ patented segmented tape design, 3.8 oz wicking polyester Birdseye fabric, one pocket, and a Tag less Collar - no scratchy tag at neck. Meets ANSI/ISEA 107-2020 Type R Class 2. Up to UPF 30 Protection. 25 Washes. Sizing: S-5X. Product can be logoed. Available in 2 styles.

Flame Resistant Winter Beanie is made of 11.8 oz. Modacrylic/Cotton/Spandex Rib Knit. Ergonomically shaped, from fitting. OCX reflective FR skull logo on back. Arc Rating: ATPV = 18 cal/cm2 NFPA 70E / CAT = 2. ASTM F1506. NFPA 2112 compliant fabric. Nomex® thread. Product can be logoed.

Meets ANSI/ISEA 107 Type R Class 2 Polyester Mesh 2" Reflective Tape 2 Mic Tabs Hook & Loop Closure 1 Pocket Left Chest

Meets ANSI/ISEA Class E (Class 3 when paired with ANSI shirt, vest or jacket) 300 Denier Polyester Oxford w/PU coating Tricot lining for added warmth Infused with Teflon™ fabric protector 2" Reflective Tape Waterproof with sealed seams Side storm flap with snaps for boot access Elastic waist w/ inside drawcord 2 Pockets 2 hand Stay Dry in Changing Conditions: Teflon™ fabric protection creates a water repellent barrier that helps keep you dry and comfortable, offering enhanced performance compared to untreated safety apparel. Stay Cleaner, Longer: The Teflon™ treatment repels liquids, resists stains, and helps prevent fading extending the life of your safety gear and maintaining a professional look on the job.

Meets ANSI/ISEA Class E (Class 3 when paired with ANSI shirt, vest or jacket) 300 Denier Polyester Oxford w/PU coating 2" Reflective Tape Waterproof with sealed seams Adjustable snap pant cuff Elastic waist w/ inside drawcord 2 Pockets 2 pass through

Flame Resistant Cooling Bandanna is made of 6 oz FR Treated Cotton. Cooling Bandana. Nomex® Thread. Meets ASTM F1506. Arc Rating ATPV = 7.2 cal/cm2. NFPA 70E/CAT = 1. Product can be logoed.

Meets ANSI/ISEA Type R Class 3 300 Denier Polyester Oxford w/PU coating and Mesh Lining 2" Reflective Tape 2 Mic Tabs Waterproof with sealed seams Concealed Zipper with snap-front storm flap Roll-away hood w/adjustable stoppers Adjustable snap cuffs 2 Pockets: 2 Lower Dual Entry with snap closure flaps

WAFFLE FLEECE KNIT HINGED BALACLAVA 10 oz Modacrylic Blend Waffle Fleece Knit Comfortable, soft and breathable Low Profile Comfort, Flat seam construction, wear alone or comfortably fits under a hard hat or helmet Flame Resistant Thread Meets ASTM F1506 requirements

Flame Resistant Aramid Rib Knit - embrace stretch and comfort in a classic style Flame Resistant Cotton Fleece Lining for added warmth and insulation Meets ASTM F1506 requirements

Miracool® FR Hard Hat Pad w/ Neck Shade. 6 oz FR Treated Cotton. Hard Hat Pad and Shade. Fastens with Hook & Loop. Meets ASTM F1506. Arc Rating ATPV = 7.2 cal/cm. NFPA 70E/CAT = 1. Product can be logoed.

Classic Mustang Back Support. Our Best Seller! The Mustang® offers optimal comfort and fit 8" Breathable Polyester Mesh Body. Four Super Memory Stays. Silicone Grip Strips inhibit riding up and attached suspenders. Sizing: S-3XL.

Our Best Seller! Value Contoured Hard Cap Knee Pads. Heavy Duty Protection. Ideal for most surfaces. Abrasion resistant and great for pivoting. EVA foam padding for support and protection. Polyethylene plastic hard cap. Durable Polyester and Tricot fabrics. Hook & Loop closure. Set of Two. Retail Ready. Flexible Small PE Cap Design for long wearing and swivel movement.

Value Super Maxx Back Support. 8" Breathable Spandex Mesh with detachable suspenders and elastic stretch panel 4 plastic stays and 2 silicone threaded "Grip Strips" 1 /12" wide detachable Hook & Loop closure suspenders Dual panel Hook & Loop closure.

9 oz Polyester Fleece. 2" reflective tape. Meets ANSI/ISEA 107-2020 Type R Class 3. Rib Knit Waistband & Cuffs. Full Zipper Closure. Hoodie with drawstring & adjustable stoppers. 2 Front Pockets. 25 Washes. Sizing: S-5X. Product can be logoed.

Our baseball bump caps are intended to protect you from bumps and scrapes on the job. Our Polyethylene material offers both comfort and superior protection. Polyester twill high profile. Product can be logoed.

Pick what is right for you! Hard Hats meet ANSI Z89.1 Type 1, Class E & G. Comes with a 6-point deluxe Nylon suspension and Front Cotton Terry sweatband. Full brim. Metric tables & conversion under brim. V201 Ratchet - Adjustable to size 6 1/2 - 7 7/8. Hard hat shell Made in USA. Product can be logoed.

Solid/mesh class 2 heavy duty two-tone surveyor vest w/zipper. Made of polyester solid front and mesh back w/450 Denier Oxford pockets for durability. Features 2" reflective tape with contrast band. Meets ANSI/ISEA 107-2020 Class 2. Reflective armholes for added visibility. Durable webbing around neck & hem. 5 Grommets - Tethering & flagging tape, dirt & rain removal, tool keepers & lanyards. 2 Mic tabs. Zipper closure. 8 Pockets (includes 4 pen/tool pockets), 1 expandable flap, 1 split multi pen/tool, 3 lower front (2 flap / 1 open), 2 lower inside (load bearing & tablet), 1 map pocket with zipper access. 25 washes. Sizing: S-5X. Product can be logoed.

Solid Two-Tone Surveyor Vest with 2" Silver reflective tape. Polyester Tricot. Meets ANSI/ISEA 107-2020 Type R Class 2. 2 Mic Tabs. 8 Pockets: Double left chest with 4 pencil compartments, right chest radio/phone with hook & loop flap, 2 lower front with hook & loop closure, 2 lower inside & 1 inside flashlight. Zipper closure. 25 washes. Sizing: S-5X. Product can be logoed.